High mast pole and Electric power tower pole joins a crack the welding apparatus is automatically a set of highly effective general awl tube, the circular pipe, the polygon awl tube longitudinal seal welding special purpose equipment, will join a crack and the welding combines, realizes the function which on an equipment on the one hand joins a crack to the work piece, on the other hand welds.
Submerged arc welding machine
The Machine Adopt Submerged Arc Welding, The Welding Power Is From Our Company, Automatic Recovered Flux. The Welding Is Continuous And Beautiful, Strong Penetration, Forming One Time, High Efficiency. The Speed Is 1-3m/Min, Is The Three Times To Gas Welding. Power pole and High mast pole normally is assembed with 2 ~4pcs plate. production procedure is spot welding to assemble into pole shape. and the Gantry Type Welding will use submerged welder to weld seam for times. for so big pole, welding seam shall penetrate completely through the plate thickness to get enough strength. and welding outlook shall be nice, because the big pole normally used for city or surbub area. It's The Best Machine With Fastest Welding Speed, Good Effect And Lowest Price.
a. travel driving motor :YDS100-4 low speed motor 1 set
b. welding lifting choose SCWS-08-1.1W deceleration machine 1 set
c. flux recovery fitting 1 set, powder bucket 1 set, suction 1 piece, sucker 1×5m
d. submerged arc welding machine 1 set
e. power cord 3×16m㎡,60m
f. arc guidance 1 sets(including welding gun)
g. cable movement pulley
h. electrical apparatus box 1 set control box 1 set
15000mm or according requirments
High mast Pole diameter
High mast pole length
Welding wire diameter
250-1200mm/min（bi-side driving, variable-frequency stepless speed control）
The AC driver : Telemecanique
Main motor power：10KW
（not include weder）
The Light pole is formed over CNC tandem press brake into octagonal or conic shape. we will have to do seam welding to finish the pole tube. The height can be 8, 10, 12, 14m. with the road construction more and more world widely. The pole dimension can be about 60mm at small end and about 200mm~340mm at the big end. This type pole quantity is the biggest required and highly competitive. So increase production speed and reduce production cost is very important. Most effective production equipments and process shall be used.
TAG:   Gantry type welding Machine